fbpx

FAQ

Answers to your questions on the Visin film, our technology and more.

Our transparent conductive coating enables electricity to be passed across insert generating heat which drives away mist and prevents its recurrence whilst continuously powered up. During heating, power is applied at either normal or boost levels – the boost function lasts for 60 secs and increases the power 2.5 times to rapidly clear the visor in more severe weather conditions.

Our transparent conductive coating enables electricity to be passed across insert generating heat which drives away mist and prevents its recurrence whilst continuously powered up. During heating, power is applied at either normal or boost levels – the boost function lasts for 60 secs and increases the power 2.5 times to rapidly clear the visor in more severe weather conditions.

In normal mode, typical battery life is 3.5 hrs. This diminishes when the boost function is used, for example if boost is activated 10% of the time the battery life reduces to 3 hrs. When the device is turned off, the current drawn is <100nA to prevent the battery being flattened. When the battery needs charging (approx. 30 minutes of normal use remaining) it the unit will vibrate 3 times as a warning and display a red LED. When out of charge, the device will power down and vibrate 4 times.

VISIN has safety at its core – making riding in adverse conditions safer by improving visibility – whilst incorporating safety features such as ‘over temperature’ controls in both operating / charging states and PCB electronic controls.

Designed for ease of application, please refer to the short video which shows the installation process.

VISIN is designed for a single application (removing will effect the adhesive ability of the gasket and may also effect the specialist coating) – therefore reusing on a different is strictly at the user risk and not recommended.

The product is supplied with a Cleaning Care Instruction sheet and cleaning wipe in the packaging. Care has to be taken not clean with products containing silicone, so please ensure you follow the instruction sheet.

Care is required to avoid excessive bending – the product must be handled with care and fitted in accordance with the How to Fit instruction sheet. Please visit the attached video link for an example of the products intended handling.

Yes, replacement VISIN inserts are available – the full range a spares and accessories are being prepared for release.

Removal is relatively straight forward, the adhesive gasket is designed to both hold VISIN effectively in place and also enable removal without damage to the visor. Any residue or debris on the face of the visor should be removed following the standard Cleaning Care Instruction sheet.

VISIN will operate between -20°C to 60°C. With accessory charging available between 0°C to 60°C.

This is dependent on the specific environmental conditions, typically a misted visor will clear in between 20 – 60 seconds. However, if activated before putting the helmet on, the time to clear will reduce significantly.

There is very little to maintain on the product – the visor insert may occasional need a light clean – a care notice on how to do this is provided with the product.

VISIN is the only battery operated universal, heated visor accessory – the heated feature is the significant differentiator between VISIN and other ‘absorbent’ products – enabling VISIN to be effective far longer, in the most challenging environmental conditions.

Our “Universal” VISIN will fit a wide range of helmets – down load and print off our template to check yours or refer to the matrix (link). Further specific designs are also available (link).

The full VISIN package comprises of a visor insert, control/power pack, power cable – and is supplied a USB charging lead, screen wipe, alignment sticker and product literature. Each aspect of this can be supplied separately from our spares catalogue / on-line shop. The multi-purpose control pack features a touch light and ‘emergency charge’ USB output – enabling you to charge USB compatible external devices in 500mA increments.

Join the community,
FOLLOW OUR PARENT COMPANY DIAMOND COATINGS

sign up for newsletter

ENQUIRIES

sales@dcvisin.co.uk

Copyright © 2020 Visin – Diamond Coatings Ltd

Website design by Digital Design Lounge

Add to cart